How Much Does Appliance Repair Cost?

Find out the average cost for hiring professional appliance repair from Sterling Appliance Repair:

Most kitchens are full of several electrical appliances. An electrical oven, dishwasher or refrigerator must have proper wires. In the event an appliance is incorrectly installed, it poses a serious possibility of fire in a home. In order to be sure your electrical appliances are up to snuff, it is important to enlist a certified service for appliance repair.

DIY electrical troubleshooting for appliances is rarely a recommended plan of action. There are a handful minor repairs where DIY might be possible. In those cases, just be sure to use the correct tools and to shut off the power.

Repairing large appliances, however, is incredibly more difficult. Don’t consider DIY repair. Your stove, for an example, might require a 250- or 125-volt circuit depending on if it is entirely gas-powered or electrical, and you’ll need to have a minimum of two 20-amp, 125-volt circuits to run smaller electrical appliances. These types of circuits can each support a couple of outlets, just don’t overload them — which often means, a third outlet is required.

The risk of a short (which might mean serious injury or even death) during any bigger project in most cases is not worth it. Just call a professional service in CITY, STATE.

You will want to search for appliance repair companies in CITY on on Google. Look for companies with several reviews. Or find a a referral from a family member if you’re having issues with an oven, microwave or refrigerator.

Hiring appliance repair companies starts with contacting a repairman in CITY that has experience in repair of kitchen appliances. Some services are appliance-specific, and don’t offer repair for all types of household appliances.

The primary reason a lot of local appliance repair services aren’t qualified to service a kitchen appliance is because of the number of electrical appliances in a kitchen that require water . Refrigerators require water to make ice in the freezer and , of course, dishwashers always use water to operate. Water is very dangerous during electrical repairs.

If electrical service isn’t completed correctly and waterlines rupture, just one example, there is a strong risk of electrocution. Water and electricity do not mix.

And you should hire a CITY appliance repair company who is able to handle both elements.

Experienced appliance repairmen will cost around $50 to $75 per hour for repairs, and individual contractors could charge somewhere between $75 and $115 an hour. This might seem expensive, that’s because it’s preferable to pay a more expensive price for high-quality work. If a “professional” charges less than $25 per hour, you should be suspicious.

You should be sure the contractor has a permit from CITY for any type of electrical repairs. Some low-quality technicians will say that they will not require a permit, but do not listen. Always double check with CITY officials.

Most local companies in CITY often charge a built-in cost for their time, from $45 to $65. You will pay the total price whether or not the repair is done, so have a small list available of appliances for the company to troubleshoot.

The average is $130 for dishwasher repairs – companies in CITY will sometimes charge $65 to $140 per hour. Plan to expect a $40 to $85 trip charge too for the repairman to drive and inspect the issue.

The average prices for brand new kitchen appliances can range around $375 and $7,500. The broad range depends the type of appliance, such as a expensive refrigerator compared to a low-cost dishwasher.

Troubleshooting or upgrading an electrical kitchen appliance is one of the most detailed repair projects one can need in a home.

One way to avoid these kinds of issues is to listen very attentively to a technician when he or she provides an estimate for repair. Certain wiring types must be used dependent on the type of kitchen appliance, and colors of wires (for neural or ground) might change when local regulations or requirements are revised.

Plus, a lot of jurisdictions now demand arc fault protection for kitchen electrical circuits plus ground fault circuit interruption (GFCI) protection. If the technician fails to mention this, or implies that you don’t really “need” them, we recommend to call a different company.

In addition, be sure to follow a contractor closely as he does the initial inspection of the refrigerator. If it’s a brand new appliance the company is installing, ask if it can use the exact same circuit or if it needs an upgrade because there are significant size and power usage differences in the latest models. The same applies to dishwashers and stoves.

A professional should be able to articulate what they are going to repair, why they must do it and go over each piece of the cost, which likely includes appliance parts, labor and miscellaneous. There are some appliance repair companies that will wave the service fee if service is done.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts